Door Closer Installation & Commercial Door Hardware
A door that slams, drags, or fails to latch is a security problem and a code problem. We install, repair, adjust and replace commercial door closers — surface-mounted, concealed and floor closers — and service the hinges, pivots and hardware that keep heavy commercial doors moving correctly.
From a single storefront closer to a full building of sticking, leaking or misaligned doors, our technicians size the closer to the door, set sweep, latch and backcheck speeds properly, and correct the alignment issues that wear hardware out early.

Door Closer & Door Hardware Services
Commercial Door Closer Installation
New surface-mounted closers sized to the door's weight and width, set for correct sweep, latch and backcheck.
Door Closer Repair
Closer faults diagnosed — leaks, broken arms, stripped valves — and repaired where the unit is serviceable.
Door Closer Replacement
Failed closers replaced with correctly sized units, adjusted on the spot so the door closes and latches every time.
Door Closer Adjustment
Sweep, latch-speed and backcheck tuning for doors that slam, creep, or fail to latch.
Hydraulic Door Closer Repair
Hydraulic closer service for leaking, noisy or erratic units on commercial doors.
Concealed Door Closer Service
Concealed overhead closers serviced and replaced without unnecessary door or frame damage.
Surface-Mounted Door Closer Installation
The standard commercial closer, installed and tuned for storefront, office and corridor doors.
Floor Closer Repair
Floor closer and pivot service for heavy glass and storefront entrance doors.
Commercial Door Hinge Repair
Worn, bent or stripped hinges repaired or replaced before they pull the door out of alignment.
Continuous Hinge Installation
Full-length geared continuous hinges that spread the door's weight and end chronic sagging.
Door Pivot Repair
Offset and center-hung pivot sets repaired or replaced on heavy entrance doors.
Door Alignment
Doors re-hung and aligned so the latch, strike and closer work together instead of fighting each other.
Storefront Door Adjustment
Storefront entrance adjustment — pivots, closers and latches tuned for smooth, secure closing.
Door Strike Plate Repair
Loose or misaligned strike plates repaired and re-anchored so the door latches positively.
Door Latch Repair
Latch faults repaired — sticking, retracting or failed latchbolts on commercial doors.
Commercial Door Handle Replacement
Commercial levers and handles replaced, matched to the door's function and keying.
Glass Door Alignment
Patch-fitting and rail glass doors aligned so they close evenly and lock without force.
Heavy-Duty Door Hardware
Grade 1 heavy-duty locks, closers and hinges for high-traffic commercial doors.
Door Coordinator Installation
Coordinators fitted on paired fire doors so the leaves close in the correct sequence.
Door Threshold Replacement
Worn thresholds replaced to seal the door bottom and restore proper closer action.
Door Sweep Replacement
Door sweeps replaced to stop drafts, light and pests at the bottom of the door.
Door Closer Questions
Why does my door slam or fail to close?
Slamming usually means the closer's hydraulic fluid has leaked or its speed valves are out of adjustment; a door that will not latch may have a worn closer, a sagging hinge line, or a misaligned strike. We diagnose which one it is before replacing anything.
Can a leaking door closer be repaired?
A closer that has lost its fluid through a failed seal generally needs replacement — the oil cannot be refilled reliably. We replace it with a correctly sized unit and adjust it on the spot.
Do you service concealed and floor closers?
Yes. We service and replace concealed overhead closers and floor closers, including pivot sets, and we re-align the door so the new closer is not fighting a sagging door.
