Panic Bar Installation & Exit Device Service
Exit devices are life-safety hardware: when a commercial door has to open instantly under pressure, the panic bar has to work every single time. We install, repair and replace panic bars, push bars and exit devices on storefront, office, school, restaurant and warehouse doors across Maryland, Washington DC and Virginia.
Whether you are fitting out a new space, replacing a worn or damaged device, or bringing an exit door up to fire and building code, our commercial technicians match the right device — rim, mortise, surface or concealed vertical rod — to your door and your occupancy requirements, then test the full egress cycle before we leave.

Panic Bar & Exit Device Services
Panic Bar Installation
New panic hardware fitted to your exit door, matched to its fire rating and tested through a full egress cycle.
Panic Bar Repair
Sticking, loose or failing panic bars repaired — latch, linkage and strike adjusted so the door opens and re-latches correctly.
Panic Bar Replacement
Worn or damaged panic bars replaced on the existing door with a correctly listed device for the door's rating.
Push Bar Installation
Push bars installed on commercial exit doors that need simple, reliable one-motion egress.
Push Bar Repair
Push bar mechanisms repaired and adjusted so the door releases with light pressure and closes fully behind you.
Exit Device Installation
Complete exit device installation — rim, mortise, surface and concealed vertical rod — for new and existing doors.
Exit Device Repair
Exit device faults diagnosed and repaired, from worn latches to broken linkage and trim.
Exit Device Replacement
End-of-life exit devices replaced with modern listed hardware matched to your door and code requirements.
Fire Exit Door Hardware
Listed fire exit hardware for rated doors — positive latching, no mechanical dogging, installed to code.
Rim Exit Device Installation
Surface-mounted rim exit devices installed on single and paired commercial doors.
Mortise Exit Device Repair
Mortise exit device lock bodies repaired or replaced, with the case, latch and trim serviced together.
Vertical Rod Exit Device Repair
Top and bottom rod adjustment and repair so both latching points engage evenly on tall and paired doors.
Exit Device Trim Replacement
Outside trim — levers, pulls and keyed entry trim — replaced and keyed to your existing system where possible.
Exit Alarm Installation
Alarmed exit devices and standalone exit alarms that sound when an exit-only door is opened.
Emergency Exit Door Hardware
Complete emergency exit hardware service for required exits in retail, office, school and assembly spaces.
Fire-Rated Door Hardware Replacement
Like-for-like replacement of hardware on fire-rated doors, keeping the door's listing and latching intact.
Panic Bar Questions
Does my business need panic bars?
Most commercial occupancies — retail, restaurants, schools, offices with higher occupant loads and places of assembly — require panic or fire-exit hardware on exit doors under building and fire codes. If your door is a required exit, we can inspect the hardware and tell you exactly what it needs.
Can you replace a panic bar on the same door?
Yes. In most cases a worn or damaged exit device can be replaced on the existing door, reusing the door prep where it matches and adjusting the strike and latch so the door closes and latches correctly.
What is the difference between a panic bar and a fire exit device?
Fire exit devices are built and listed for fire-rated doors — they must latch positively and have no mechanical dogging that holds the latch open. Panic hardware for non-rated doors may include dogging. We install the correct listed device for your door's rating.
